20A 4400W voltage protector 220V 0917 has protection functions for voltage anomalies such as overvoltage, undervoltage, surge/spike, etc. It can quickly cut off the power supply in case of voltage instability or sudden situations to protect the air conditioning equipment from damage.
20A 4400W Wall-mounted Air Conditioner Voltage Protector 220V 0917
Phase: Single Phase
Power Type: AC
Over Voltage Cut-off：255VAC
Under Voltage Cut-off：165VAC
| Model No. | 0917 |
| Brand Name | YXST |
|
Operating Voltage |
220VAC |
|
Operating Frequency |
50 Hz-60 Hz |
|
Over Voltage Cut-off |
255VAC (could be customized) |
|
Under Voltage Cut-off |
165VAC (could be customized) |
| Delay Time for Reconnection | 210s + Bypass |
|
Output Capacity |
20 Amps,4400W |
| Standard Package |
Double Blister |
| Warranty | 1 Year |
0917 is a voltage protector designed for a 220V voltage environment, suitable for wall-mounted air conditioners with a rated current of 20A and a rated power of 4400W.
The rated power of 4400W matches the power requirement of the wall-mounted air conditioner, ensuring that the protector can withstand the maximum load when the air conditioner is running and provide effective overvoltage and Undervoltage protection.
As a dedicated voltage protector for wall-mounted air conditioners, its design takes into account the convenience of installation and space utilization and is suitable for installation on the wall or near the air conditioner without taking up too much space.
When selecting and using this type of voltage protector, it is recommended to pay attention to the following points:
Make sure that the rated voltage, current and power of the protector match the specifications of the air conditioning equipment to avoid safety problems caused by specification mismatch.
Regularly check the working status of the protector to ensure that it is in a good protective state and promptly detect and deal with any potential problems.
Follow the installation and use instructions of the protector to ensure correct installation and wiring to avoid malfunctions or safety accidents caused by improper operation.
