Wall-mounted Air Conditioner Voltage Protector 120V N008-120

Specifications

How To Install Voltage Protector For Wall-mounted Air Conditioner

1. Power off preparation
- Turn off the power of the air conditioner and unplug the air conditioner before installation to ensure safe operation [10].

2. Insert the voltage protector
- Plug the plug-and-play voltage protector directly into the wall power socket, making sure that the plug and the socket are firmly in contact.

3. Connect the air conditioner power supply
- Plug the power plug of the air conditioner into the output socket of the voltage protector, making sure that the plug matches the protector interface to avoid looseness.

4. Power-on test
- Turn on the main power switch and observe the status of the protector indicator light. When working normally, the green light is always on; if the red light flashes or an alarm sounds, check whether the voltage is abnormal or whether the protector is faulty.

The plug-and-play type is suitable for single-phase 220V household wall-mounted air conditioners. It is easy to install and does not require professional electrician operation. Warm reminder: Confirm that the rated voltage of the protector (such as 220V) is consistent with the air conditioner and the home power grid to avoid malfunction of the protector due to voltage mismatch.

Installing a surge protector improves electricity safety. Surges not only damage electrical equipment, but may also pose safety hazards, such as causing fires. The use of surge protectors can significantly improve the safety of household electricity use.

120V Surge Protector N008-120 is an electronic protection device that prevents excessive voltage from damaging electrical equipment. 

You May Also Like

→ Wiring Type 30A 6600W Voltage Protector For Air Conditioner 1621

Frequently Asked Questions