According to the voltage fluctuation in your area, you can set the undervoltage and overvoltage cutoff voltage of the adjustable 220V surge protector for air conditioners N021-220 reasonably. For example, if the voltage in your area is often below 200V, you can set the undervoltage cutoff to the lower limit of this range.
Under Voltage Cut-off:165V~210V adjustable
Over Voltage Cut-off:230V~265V adjustable
Surge Protection:330 Joules
| Operating Voltage | 220V AC |
| Operating Frequency | 50Hz-60Hz |
| Under Voltage Cut-off | 165V~210V adjustable |
| Over Voltage Cut-off | 230V~265V adjustable |
| Surge Protection | 330 Joules |
| Delay Time | 3min-5min adjustable |
| Output Capacity | 30A,6600W |
| Packing | Double Blister |
| Warranty | 1 Years |
Device selection:
Make sure that the total power of the devices you connect to the protector does not exceed 6600W (30A), and that the cell is overloaded.
Adjustment settings:
According to the voltage fluctuations in your area, reasonably set the undervoltage and overvoltage electrode voltages. For example, if the voltage in your area is often below 200V, you can set the under-voltage electrode to the lower limit of the range.
Delay time setting:
Set an appropriate delay time to ensure that the device will not restart continuously due to short-term fluctuations when the voltage is restored.
Stable power supply:
During installation and use, please make sure that the power plug is properly inserted to avoid additional loss due to poor contact.
Maintenance and inspection:
Regularly check the status to ensure that the channel equipment is working properly, and the casing is not damaged, and clean it in time.
Protect sensitive equipment:
For connection-sensitive equipment such as air conditioners, computers, stereos, large appliances, washing machines, etc.
| CARTON | Q’TY | G.W | SINGLE PACK |
| 47*41*34cm FYI | 50PCS | 14.6kgs FYI | Blister(s) |
