products
N019-220 Aircon Surge Protector 30A 6600W

N019-220 Aircon Surge Protector 30A 6600W

Running at too low or too high a voltage will cause the air conditioner compressor and other components to fail to start or operate normally. N019-220 Aircon surge protector 30A 6600W ensures the safe use of the air conditioner.

Under Voltage Cut-off:180V
Over Voltage Cut-off:264V
Delay Time:3min
Output Capacity:30A,6600W

Online Inquiry
N019-220 Aircon Surge Protector 30A 6600W


N019-220 Aircon Surge Protector 30A 6600W Parameter


Operating Voltage 220V AC
Operating Frequency 50Hz-60Hz
Under Voltage Cut-off 180V
Over Voltage Cut-off 264V
Delay Time 3min
Output Capacity 30A,6600W
Packing Double Blister
Warranty 1 Years


N019-220 Aircon Surge Protector 30A 6600W Instruction

N019-220 Aircon Surge Protector 30A 6600W Packaging Information


CARTON Q’TY G.W SINGLE PACK
47*41*34cm FYI 50PCS 14.6KGS FYI Blister(s)

The following is a detailed introduction to this N019-220 air conditioner surge protector. Its various parameters and characteristics ensure the safety of air conditioner use.

1. Basic parameters
Working voltage: This surge protector is suitable for a 220V AC voltage environment, which is consistent with the common household power voltage and can be well adapted to the use scenario of household air conditioners.
- Working frequency: It can work normally in the frequency range of 50Hz - 60Hz, which covers the power grid frequency standards of most countries and regions, ensuring its versatility.

2. Key protection parameters
Undervoltage cutoff: When the voltage drops to 180V, the protector will automatically cut off the current output. Running at too low a voltage may cause components such as the air conditioner compressor to fail to start or operate normally. Being undervoltage for a long time will also damage the air conditioner motor and shorten its service life.
- Overvoltage cutoff: Once the voltage reaches 264V, the protector immediately cuts off the current. Excessive voltage may break down the electronic components inside the air conditioner, causing serious consequences such as short circuits or even fires. The overvoltage cutoff function effectively avoids such risks.

3. Special features
- Delay time: The surge protector has a 3-minute delay time. When the air conditioner loses power due to a power outage or other reasons, it will not immediately resume power supply when it is powered on again but will delay for 3 minutes. This can prevent the air conditioner from starting frequently, because the instantaneous current of frequent startup is large, which can easily cause an impact on the air conditioner compressor. Delayed startup can effectively protect the compressor and extend the overall life of the air conditioner.

4. Output performance
- Output capacity: Its output capacity is 30A and 6600W. The current carrying capacity of 30A can meet the current requirements of most common household air conditioners for normal operation and surge response; the power upper limit of 6600W indicates that it can be adapted to air conditioners of corresponding power to ensure a stable power supply.

5. Packaging form
- Packaging: Double blister packaging is used, which can provide good protection for the surge protector and effectively prevent it from being damaged by collision and extrusion during transportation and storage.

The above is a detailed introduction to this N019-220 air conditioner surge protector. From various parameters to packaging, it fully guarantees the protection of the air conditioner and its safety.


The Keywords of this product:Air Conditioning Surge Protector